Our country attaches great importance to the recycling of asphalt pavement that has reached its service life. When recycling asphalt pavement, if it is only done manually, it requires relatively more manpower investment and low work efficiency. So in order to improve work efficiency in recycling waste asphalt pavement, it is necessary to use asphalt pavement milling and screening equipment.
The crushing and screening equipment for asphalt pavement milling and planing materials needs to be regularly maintained throughout the entire process of use, because the environment in which the equipment is used is relatively harsh, and coupled with the long working hours every day, it is easy to cause aging of equipment components, including bearing damage, and other minor problems. Therefore, regular maintenance and repair are necessary.
The asphalt pavement milling material crushing and screening equipment generally requires comprehensive maintenance every 3-6 months in terms of maintenance time. For example, if you need to change the engine oil, you need to fill each bearing with lubricating grease, especially when filling the lubricating grease, you need to check if there are any problems with the bearings. If there are problems, you need to replace them in a timely manner, and then add lubricating grease to ensure the normal operation of the bearings. Especially when there is a lot of noise in the equipment and various problems occur during operation, it is even more important to choose knowledgeable people for maintenance and repair.
The asphalt pavement milling material crushing and screening equipment is designed for digging, recycling, crushing, and screening some old and worn-out asphalt pavements that have reached their service life. Through these procedures, the asphalt pavement is recycled. The treated asphalt pavement particles have reached the standard for laying asphalt pavement, and can be reused through screening. For larger particles, they need to be crushed again to meet the particle size standard for laying pavement. Of course, these broken asphalt waste materials cannot be directly used. New asphalt, new aggregates, etc. need to be added, and they can be re mixed according to a certain proportion to lay the asphalt pavement again, ensuring that the asphalt pavement has strong load-bearing capacity and long service life after laying.
Asphalt pavement milling material crushing and screening equipment has become an indispensable tool for recycling asphalt pavement waste in our country. It is relatively easy to operate, has high work efficiency, and is also convenient and easy to maintain. However, when purchasing this type of equipment, attention should also be paid. By comparing multiple options, one can choose one with good performance, high degree of automation, high work efficiency, easy operation, and high cost-effectiveness in order to purchase with confidence.
Tags:
