Our country attaches great importance to the recycling of asphalt pavement that has reached its service life. When recycling asphalt pavement again, if it is only done manually, it requires relatively more manpower investment and low work efficiency. So in order to improve work efficiency when recycling waste asphalt pavement, it is necessary to use asphalt pavement milling, planing, crushing and screening equipment.
The asphalt pavement milling, planing, crushing and screening equipment needs regular maintenance throughout its use, as the equipment operates in a harsh environment and works for a long time every day, which can easily lead to aging of equipment components, including bearing damage, and other minor problems. Therefore, regular maintenance is necessary.
In terms of maintenance time, the asphalt pavement milling, planing, crushing and screening equipment generally needs to undergo comprehensive maintenance every 3-6 months. For example, if you need to change the engine oil, you need to fill each bearing with lubricating grease, especially when filling the lubricating grease. You need to check if there are any problems with the bearings. If there are problems, you need to replace them in a timely manner. After replacement, add lubricating grease to ensure the normal operation of the bearings. Especially when there is a lot of noise in the equipment and some problems arise during operation, it is even more important to choose knowledgeable personnel for maintenance and repair.
The asphalt pavement milling material crushing and screening equipment is designed to excavate, recover, crush, and screen some old and worn-out asphalt pavement that has reached its service life. Through these procedures, the asphalt pavement is recycled. The processed asphalt pavement particles have reached the standard for laying asphalt pavement, and can be reused through screening. For larger particles, they need to be crushed again to achieve the particle size standard for laying pavement. Of course, these broken asphalt waste materials cannot be directly used yet. New asphalt, aggregates, etc. need to be added to mix them again in a certain proportion, and the asphalt pavement can be laid again to ensure strong load-bearing capacity and long service life after laying.
The asphalt pavement milling, planing, crushing and screening equipment has become an indispensable part of our country's recycling of asphalt pavement waste. It has simple operation, high work efficiency, and convenient and simple maintenance. However, when purchasing this type of equipment, attention should also be paid. You can compare multiple options and choose one with good performance, high automation, high work efficiency, easy operation, and high cost-effectiveness in order to purchase with confidence.
